Bando P96L075 SD QD Timing Belt Pulley (SD) TERMINALS

Bando P96L075 SD QD Timing Belt Pulley (SD) TERMINALSBando P96L075 SD The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

420 Line Amps 5

weight³ 926 lb Efficiency

Std Efficient Low SF Up Rated

genteq3464

37J839S521G1 HP 5 VOLTS 230/460 AMPS 14

1 LB-FT Pull-Up Torque 31

Nominal Outside Length (mm)7137

Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 2 HP Mounting W-6 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 11

KL3403 SPEC

762 Ohms A Ph / 0 Ohms B Ph Start Configuration DOL Break-Down Torque 12

3 RPM 1775 FRAME 56C SER