Bando CX45 Power King Cog INDUSTRIALBando CX45 Studies have determined that using Bando Power King Cog and Power Ace Cog V belts can save substantial dollars on energy consumption. The precision molded raw edge cogged construction transfers power with much greater efficiency, allowing for smaller sheave sizes and increased power transmission capabilities. The bias cut cover stock provides lateral stability across the width of the belt while allowing axial flexibility. Stability is
Number of Poles: 2
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 3752M Mounting Arrangement F1 Number of Poles 2 Overall Length 21
875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 3520 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings
2 POLES 4 NUMBER SPEEDS 1 RPM 1790 RPM 4 1485 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 460 VOLTS 460 VOLTS 4 400 FRME 444 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING 6313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 10 AWG Motor Type 1036M Mounting Arrangement F1 Number of Poles 4 6 Overall Length 27
4 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 0748M Mounting Arrangement F1 Number of Poles 4 Overall Length 19
G7-303-30 Parts
Output HP1/70 Hp
1x(Code J) No load current 26
000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 50 HZ Voltage @ Frequency 380
Power supply 200-240 V Input phases Three-phase Rated current (ND) 2
5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter IP Rating NONE KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3428M Mounting Arrangement F1 Number of Poles 6 Overall Length 12
