Baldor FDEM3710T-5 7.5HP, 1760RPM, 3PH, 60HZ, 213T, 3738M, TEFC, F TERMINALS

Baldor FDEM3710T-5 7.5HP, 1760RPM, 3PH, 60HZ, 213T, 3738M, TEFC, F TERMINALSSpecs Catalog Number FDEM3710T 5 Enclosure TEFC Frame 213T Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 7. 500 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 575. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None

Standard IEC 60034-1 Frequency 50 Hz Voltage 380-400-415/660-690//460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1000 rpm Output rating 18

5 RATING 40C AMB-CONT CC 010A DE 6208 ENCL TEFC Performance

Frame Material Cast Iron Impregnation Method Dip and Bake Polyester Regreasing System At Drive end and Non-drive end Main terminal box hole NPT 1 1/2" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 203A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap No-Without Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 12 Downloads

103 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1750 rpm Speed Code Single Speed Motor Standards IEC Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

6 POLES 8 NUMBER SPEEDS 1 RPM 885 RPM 2 885 RPM 3 875 RPM 4 725 RPM 5 725 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 380 VOLTS 5 190 FRME 256 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE OPPOSITE END BEARING 6207-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

2x(Code J) No load current 4

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 4 Overall Length 11

2 POLES 6 NUMBER SPEEDS 1 RPM 1185 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 284 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6310-J/C3 SHAFT END BEARING 6310-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Cable application HMI Cable type INTERCONNECTION Connector type DB9 - DB9 Cable length 2 m Rated voltage Voltage up to 80 V Certification Without Attributes

EHM2531T SPEC

MACH EC1270A02SP ELEC CAP

39R006Y389G1 HP 15 VOLTS 200 AMPS 41 RPM 1765 FRAME 254T SER