Bando P168-14M-115 HT QD Timing Belt Pulley (M) RuudBando P168 14M 115 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
15 STARTCAPMFD N\A SHIPPING WEIGHT 325 BREAKDOWN TORQUE 233 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 241 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 167 NEMA NOMINAL EFFICIENCY 94
Load 88° C Start Configuration DOL Break-Down Torque 534 LB-FT Pull-Up Torque 269 LB-FT Locked-Rotor Torque 283 LB-FT Starting Current 440 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Nominal Outside Length (mm)2946
4 a Heater Indicator No Heater Insulation Class B Inverter Code Inverter Ready IP Rating IP56 KVA Code G Lifting Lugs No Lifting Lugs Max Speed 1800 rpm Motor Lead Quantity/Wire Size 3 @ 6 AWG Motor Type A36062M Mounting Arrangement F1 No Load Current 15
4x(Code G) No load current 102 A Rated torque 887 ft
75 LB-FT Pull-Up Torque 2
Catalog Number CFSWDM23932T-E Enclosure TEFC Frame 256TC Frame Material Stainless Steel Frequency 60
25 MOUNTING BAND MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 40 ROTATION CW/CCW SERVICE FACTOR 1 RUNCAPMFD 12
00 NEMA-NOM-EFF 77 RATING 40C AMB-CONT DE 6203 ENCL TEAO Performance
26 IN Power Factor 85 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
4 POLES 2 NUMBER SPEEDS 1 RPM 3450 HERTZ 60 VOLTS PRIMARY 208-230/115 V VOLTS 208 VOLTS 2 230 VOLTS 3 115 FRME 56 SHAFT CODE Y STATOR DIAMETER 6
at Drive end and Non-drive end Main terminal box hole 2xM63x1
