3/4" MDF : Full Panel - 4ft x 8ft Wood

3/4" MDF : Full Panel - 4ft x 8ft WoodMDF (Medium Density Fiberboard) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibers, combining it with wax and a resin binder, and forming it into panels by applying high temperature and pressure. MDF is generally more dense than plywood, and is great for machining on the Shopbot because of its uniformity. Sometimes used for making large positive molds for vacuum forming, negative molds for casting, or

036" Stainless Steel 304 Plate

we suggest connecting the control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch)

ARM Cortex M0 core running at 16MHz

8mA/idle and 220mA no load operating

There are 60 RGB LEDs per meter

This board ship default to 5V

The extra two pins (17 and 18) are for the green and blue LEDs

The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded

Why use Adafruit's Module

USB to serial base unit for the ID-3LA

EagleCAD PCB files

You'll need your Pi to be on the Internet to do this